It's annoying to always have to be pressing the "check" button - Buick Envision Forum
 1Likes
  • 1 Post By CanMan1414
 
LinkBack Thread Tools
post #1 of 2 (permalink) Old 11-18-2017, 07:34 PM Thread Starter
Junior Member
 
Join Date: Apr 2017
Location: Calgary Alberta
Posts: 28
It's annoying to always have to be pressing the "check" button

I find it annoying that when I hop in the car for a quick drive I always have to press the "check" button in the middle of the steering wheel right side controls to dismiss the "you are driver 1...." message in the center of the instrument panel. Or "Icy driving conditions" - whatever it wants to warn about. It should time-out and disappear automatically within a minute or two of you starting the vehicle but it doesn't. I've driven for maybe 10-15 mins to see if will ever go away before I get so pissed off that I just press the button to dismiss it.

I hope they fix with a s/w update in the future.
NormT likes this.
CanMan1414 is offline  
post #2 of 2 (permalink) Old 11-19-2017, 08:45 AM
Senior Member
 
Join Date: Jun 2017
Location: OH-IO!
Posts: 257
On vehicles equipped with keyless/passive start, the vehicle will start if the fob is placed in the fob pocket.

In most cases, these concerns cannot be duplicated.
The above systems use Radio Frequency (RF) to transmit information. Some aftermarket devices cause Radio Frequency Interference (RFI), which can "jam" the radio frequency being transmitted.
Listed below are a number of aftermarket devices that can cause RFI. In many cases, these types of devices will be attached to the customer's key ring and could be removed from the key ring or from inside the vehicle when the customer drops the vehicle off for service.
  • Vehicle immobilizer keys from other vehicles
  • Keyless access transmitters from other vehicles
  • Interstate/bridge toll passes
  • Gate/door passes to allow access to pools, driveways, entry doors, etc.
  • Community/parking access cards
  • Fuel station speed passes
  • Building access swipe cards/ transponder devices
Additional items to be aware of:
  • market LED dome, tail, turn, stop, strip, floor, door, Logo, head lights In many cases, when the LED lighting is turned on it can interfere with a RF signal. Example, RKE inoperative after the first fob button press. When the RKE fob button is pressed the dome lights may turn on, which if equipped with an aftermarket LED dome light, it can interfere with any additional fob button presses.
  • Certain cell phone chargers
  • USB power banks
  • USB flash lights
  • Fans (12 volt or 110 volt)
  • Any type of USB, 12 volt or 110 volt chargers

2016 Envision Prem ll
NormT is offline  
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome