Buick Envision Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
We just bought a '22 envision essence. We are having trouble with the key fobs for memory seating. My wife set her seating position and saved memory button one. Works fine. I set my seating position and set memory button two. Both key fobs are set for driver one. Whenever I use car with my key fob, it always resets the seat to driver one position. I can't figure out how to get the car to read my key fob for driver two. Any suggestions?
 

·
Registered
Joined
·
9 Posts
We just bought a '22 envision essence. We are having trouble with the key fobs for memory seating. My wife set her seating position and saved memory button one. Works fine. I set my seating position and set memory button two. Both key fobs are set for driver one. Whenever I use car with my key fob, it always resets the seat to driver one position. I can't figure out how to get the car to read my key fob for driver two. Any suggestions?
Have you tried this

Auto Seat Entry Memory Recall
Seat Entry Memory will automatically begin
movement to the seating positions of the 1
or 2 button corresponding to the driver’s
remote key number 1 or 2 detected by the
vehicle when:
. The vehicle is turned ON.
. Seating positions have been previously
saved to the same 1 or 2 button. See
“Saving Seating Positions” previously in
this section.
. Seat Entry Memory is enabled. See
“Enable Automatic Recalls” under “Vehicle
Personalization Settings” previously in this
section.
. The vehicle is in P (Park).
Seat Entry Memory Recall will continue if
the vehicle is shifted out of P (Park) prior to
reaching the saved memory position.
If the saved memory seat position does not
automatically recall, verify the recall is
enabled. See “Enable Automatic Recalls”
under “Vehicle Personalization Settings”
previously in this section.
If the memory seat recalls to the wrong
position, the driver’s remote key number 1
or 2 may not match the memory button
number positions they were saved to. Try
the other remote key or try saving the
positions to the other 1 or 2 memory
button. See “Saving Seating Positions”
previously in this section.
Automatic Seat Entry Memory recalls are
only available for driver’s remote key
numbers 1 and 2. Remote keys 3–8 will not
provide Seat Entry Memory recalls.
Auto Seat Exit Memory Recall
Seat Exit Memory will begin movement to
the seating position of the B
button when:
. The vehicle is turned off and the driver
door is open or opened within a
short time.
. A seating position has been previously
been saved to the B memory button.
See “Saving Seating Positions” previously
in this section.
. Seat Exit Memory is enabled. See “Enable
Automatic Recalls” under “Vehicle
Personalization Settings” previously in this
section.
. The vehicle is in P (Park).
Seat Exit Memory recall will continue if the
vehicle is shifted out of P (Park) prior to
reaching the saved memory position.
Seat Exit Memory is not linked to the
driver’s remote key. The seating position
saved toBis used for all drivers.
 

·
Registered
Joined
·
1 Posts
We just purchased a '22 imagine quintessence. We are experiencing difficulty with the critical coxcombs for memory seating. My better half set her seating position and saved memory button one. Turns out great. I set my seating position and set memory button two.
 
1 - 4 of 4 Posts
Top