Buick Envision Forum banner

Tow Dolly Requirements

2162 Views 4 Replies 3 Participants Last post by  Jason
We own a 2020 Buick Enclave and want to tow it behind our Class A motorhome. It can be towed on a dolly with the front wheels off the ground. It's front wheel drive. The Owners Manual states everything you need to do to tow it. My only, real question is why do we need to disconnect the battery once everything is hooked up and ready to go. I do not want to lose all the settings. What is the purpose in disconnecting it? Thanks
1 - 5 of 5 Posts
Not sure about your Enclave but I have a 2021 Envision FWD and have to disconnect the battery when I dolly tow or the electronic parking brake will automatically LOCK the rear wheels when I start towing. There is supposed to be a fuse somewhere to pull but I have not found it.I do not loose any settings when battery is disconnected.
Not sure about your Enclave but I have a 2021 Envision FWD and have to disconnect the battery when I dolly tow or the electronic parking brake will automatically LOCK the rear wheels when I start towing. There is supposed to be a fuse somewhere to pull but I have not found it.I do not loose any settings when battery is disconnected.
Great info! I’ve been looking everywhere to see if I can dolly tow a 2022 model envision, the owners manual is unclear. And was wandering why you couldn’t since it’s fwd. I’m assuming I can do the same with a 2022.
Great info! I’ve been looking everywhere to see if I can dolly tow a 2022 model envision, the owners manual is unclear. And was wandering why you couldn’t since it’s fwd. I’m assuming I can do the same with a 2022.
I found that I have to do it in this sequence=Put car on dolly, Latch it down as usuall, start car,make sure electronic brake is off, shut car off ,hit button to on but do not start it, remove negative cable. Of course this is for my 2021 Envision FWD.
I found that I have to do it in this sequence=Put car on dolly, Latch it down as usuall, start car,make sure electronic brake is off, shut car off ,hit button to on but do not start it, remove negative cable. Of course this is for my 2021 Envision FWD.
Thanks! I figured the parking brake would be the only thing preventing dolly towing it.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top